Liqui Moly, Motor Clean Engine Flush, 500ml

The Liqui Moly Motor Clean engine flushing agent in a 500 ml container is a highly effective combination of additives for the effective removal of soiling from the inside of petrol and diesel engines, especially before oil changes. The agent dissolves oil residues and deposits from the oil circuit, removing them when the used oil is drained. The newly filled fresh oil can thus ensure optimum lubrication in the cleaned engine and minimise wear. Motor Clean is compatible with all commercially available engine oils for petrol and diesel engines with or without particulate filters, catalytic converters, turbochargers and with timing belts running in oil. Attention - not suitable for motorbikes with wet clutch! Application: Add to engine oil at operating temperature before changing the oil. After adding, allow the engine to idle for approx. 10 minutes. Then change the oil and filter. Further details:

• Dosage: 500 ml is sufficient for up to 5 litres of oil
• Colour: Yellow / Brown
• Flash point: 63°C

Hazard and safety information
Danger

Hazard statements:
H319-Causes serious eye irritation. H317-May cause an allergic skin reaction. H304-May be fatal if swallowed and enters airways.

Precautionary statements:
P101-If medical advice is needed, have product container or label at hand. P102-Keep out of reach of children. P261-Avoid breathing vapour or spray. P280-Wear protective gloves/eye protection/face protection. P301+P310-IF SWALLOWED: Immediately call a POISON CENTER/doctor. P305+P351+P338-EYE CONTACT: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. P314-If you feel unwell, seek medical advice/attention. P331-Do NOT induce vomiting. P405-Keep locked up. P501-Dispose of contents/container to an authorised waste disposal facility.

EUH066-Repeated exposure may cause skin dryness or cracking.